data table added

mnras_template.tex

@@ -51,6 +51,7 @@
 % Only include extra packages if you really need them. Avoid using amssymb if newtxmath is enabled, as these packages can cause conflicts. newtxmatch covers the same math symbols while producing a consistent Times New Roman font. Common packages are:
 \usepackage{graphicx}	% Including figure files
 \usepackage{amsmath}	% Advanced maths commands
+\usepackage{pdflscape}	% Landscape environment
 
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 
@@ -70,7 +71,7 @@
 
 % The list of authors, and the short list which is used in the headers.
 % If you need two or more lines of authors, add an extra line using \newauthor
-\author[K. T. Smith et al.]{
+\author[Srikrishna Ayyalasomayajula et al.]{
 Srikrishna Ayyalasomayajula,$^{1,2}$
 Neel Kuppa,$^{2}$
 Sanahbhi Gauraw,$^{2}$
@@ -141,42 +142,25 @@ as a numbered equation:
 
 Refer back to them as e.g. equation~(\ref{eq:quadratic}).
 
-\subsection{Figures and tables}
+\subsection{Results and Discussion}
 
-Figures and tables should be placed at logical positions in the text. Don't
-worry about the exact layout, which will be handled by the publishers.
 
-Figures are referred to as e.g. Fig.~\ref{fig:example_figure}, and tables as
-e.g. Table~\ref{tab:example_table}.
-
-% Example figure
-\begin{figure}
-	% To include a figure from a file named example.*
-	% Allowable file formats are eps or ps if compiling using latex
-	% or pdf, png, jpg if compiling using pdflatex
-	\includegraphics[width=\columnwidth]{example}
-    \caption{This is an example figure. Captions appear below each figure.
-	Give enough detail for the reader to understand what they're looking at,
-	but leave detailed discussion to the main body of the text.}
-    \label{fig:example_figure}
-\end{figure}
-
-% Example table
-\begin{table}
-	\centering
-	\caption{This is an example table. Captions appear above each table.
-	Remember to define the quantities, symbols and units used.}
-	\label{tab:example_table}
-	\begin{tabular}{lccr} % four columns, alignment for each
-		\hline
-		A & B & C & D\\
-		\hline
-		1 & 2 & 3 & 4\\
-		2 & 4 & 6 & 8\\
-		3 & 5 & 7 & 9\\
-		\hline
-	\end{tabular}
-\end{table}
+\begin{landscape}
+ \begin{table}
+  \caption{Resistance measurements for different wire cross-sectional areas at varying probe distances. All resistance values measured in $\Omega$.}
+  \label{tab:resistance}
+  \begin{tabular}{cccccc}
+    \hline
+    Area & \multicolumn{5}{c}{Probe distance} \\
+    (mm$^2$) & 20 cm & 40 cm & 60 cm & 80 cm & 100 cm \\
+    \hline
+    0.1285 (26 AWG) & 2.6 $\Omega$ & 5.6 $\Omega$ & 4.5 $\Omega$ & 9.3 $\Omega$ & 10.0 $\Omega$ \\
+    0.06424 (29 AWG) & 4.7 $\Omega$ & 8.9 $\Omega$ & 13.6 $\Omega$ & 18.0 $\Omega$ & 22.6 $\Omega$ \\
+    0.03204 (32 AWG) & 9.0 $\Omega$ & 18.1 $\Omega$ & 27.3 $\Omega$ & 36.3 $\Omega$ & 45.4 $\Omega$ \\
+    \hline
+  \end{tabular}
+ \end{table}
+\end{landscape}
 
 
 \section{Conclusions}